Landa PG4-35324 Portable Belt-Drive Gas Cold Water Pressure Washer — 3500 PSI, 3.7 GPM, Honda GX390 (Part No. 1.107-011.0)
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
The PG4-35324 is Landa's portable cold-water gas washer for crews that have to clean where there is no power drop - loading docks, dumpster pads, parking structures, fleet yards and sidewalks. A Honda GX390 drives a tri-plunger high-pressure pump through a belt rather than a direct coupling, so the pump turns at 1185 RPM instead of engine speed, which is the single biggest reason belt-drive units outlast direct-drive ones on daily commercial duty. It rolls on flat-free tires with chrome handles front and rear, so one person can walk it out of a truck bed and start working. It is the lowest-cost entry into the Landa line and the right pick when hot water is not needed and mobility is.
- Honda GX390 389cc overhead-valve gas engine with low-oil alert, so no electrical supply or generator is required on site.
- Belt-drive transmission runs the pump at 1185 RPM instead of engine speed, cutting pump heat and wear on daily-duty cleaning.
- Tri-plunger high-pressure pump with three ceramic plungers and a forged brass head, carrying a 7-year limited pump warranty.
- Rated 3.7 GPM at 3500 PSI, enough to strip built-up grease film and gum from concrete without a heater.
- Totally enclosed OSHA-compliant belt guard keeps the drive covered during operation.
- 24-inch hose guard at the pump outlet gives burst protection at the highest-stress point of the hose.
- Certified to the UL-1776 pressure-washer safety standard.
- Chrome-plated handles on both the front and the back of the frame for two-point lifting into a pickup bed.
- Two flat-free tires plus two shock-absorbing spring-loaded rubber feet stop the unit walking while running.
- E-Z start valve bleeds pump pressure so the engine pull-starts without fighting the pump.
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-888-287-3732 the same day.
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
Delivery method and services depend on the order and destination. Confirm the shipment plan before ordering. Full guide: how freight delivery works.
What happens if it arrives damaged?
Note the damage on the delivery receipt, take photos, and contact us promptly so we can confirm the process applicable to that shipment.
Where can I find warranty information?
Use the warranty document published for this exact model, when present, and contact us with questions before ordering.
Can my organization request purchase-order terms?
Use the commercial quote form to describe your PO or net-terms process. We will confirm whether the requested process can be supported.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Model number
- PG4-35324
- Part number
- 1.107-011.0
- Water type
- Cold water
- Working pressure
- 3500 psi
- Flow rate
- 3.7 gal/min
- Power source
- Gasoline engine
- Engine
- Honda GX390
- Engine displacement
- 389 cc
- Pump
- LT4540R.2 tri-plunger belt drive
- Pump speed
- 1185 RPM
- Pump warranty
- 7-year limited
- Mobility
- Flat-free tires plus front and rear chrome handles
- Safety certification
- UL-1776
- Note
- Performance certified by CETA to be within 5% of listed specifications
Compare models in this line
Same manufacturer, same machine type — the three closest in price.
More machines in the line
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.
