Square Scrub Pivot + HydroVac Pro One-Pass Orbital Floor Scrubber — 14" x 20" Head, 2 gal Solution / 2.5 gal Recovery, 30" Water Lift (Model SS EBG-20CH PIVOT)
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
This is the Pivot orbital head factory-married to the HydroVac Pro solution-and-recovery system, which turns a floor-prep machine into a true one-pass scrubber. A single trigger runs the orbital motor and the vacuum together: the machine lays solution from a 2 gallon gravity-fed tank, the 3450 OPM head breaks up biofilm and soil in grout lines and porous concrete, and a 24" rear squeegee pulls the slurry into a 2.5 gallon recovery tank behind it — no separate mop-up or extraction step. Because it keeps the Pivot's compact rectangular footprint, it reaches into restrooms, kitchen lines and tight back-of-house areas that ride-on and large disc scrubbers cannot enter. Best-fit buyers are food service, healthcare and any facility fighting grouted tile.
- Lays solution, scrubs and recovers slurry in a single pass — eliminates the separate extraction or mop-up step.
- 14" x 20" orbital head at 3450 oscillations per minute driven by a 1.5 HP 3450 RPM motor.
- 2 gallon solution tank with lever-controlled gravity feed and a 2.5 gallon recovery tank with rear drain.
- One trigger operates the scrub motor and the vacuum simultaneously for single-operator control.
- 24" rear squeegee with 30" water lift and 90 CFM airflow for a dry-behind finish on grouted tile.
- Orbital agitation attacks biofilm in grout lines and porous concrete that rotary disc heads ride over.
- Compact rectangular footprint fits restrooms, kitchen lines and other tight areas large scrubbers cannot enter.
- 212 lb operating weight; 12 amp draw at 115V on a 50 ft 14-gauge cord — no dedicated circuit required.
- Rated for grouted tile, LVT/LVP, concrete and VCT; not intended for chemical or dry stripping duty.
- UL/CSA/CE certified; full Square Scrub pad program carries over to the head.
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-888-287-3732 the same day.
Field demonstration
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
Delivery method and services depend on the order and destination. Confirm the shipment plan before ordering. Full guide: how freight delivery works.
What happens if it arrives damaged?
Note the damage on the delivery receipt, take photos, and contact us promptly so we can confirm the process applicable to that shipment.
Where can I find warranty information?
Use the warranty document published for this exact model, when present, and contact us with questions before ordering.
Can my organization request purchase-order terms?
Use the commercial quote form to describe your PO or net-terms process. We will confirm whether the requested process can be supported.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Pad Size
- 14 in x 20 in
- Oscillations
- 3450 per minute
- Motor
- 1.5 HP / 3450 RPM
- Solution Tank
- 2 gal gravity feed
- Recovery Tank
- 2.5 gal with rear drain
- Squeegee Width
- 24 in
- Vacuum Water Lift
- 30 in
- Vacuum Airflow
- 90 CFM
- Amp Draw
- 12 amps
- Voltage
- 115V
- Power Cord
- 50 ft / 14 gauge
- Total Weight
- 212 lb
- Surfaces
- Grouted tile / LVT / LVP / concrete / VCT
- Not Rated For
- Chemical stripping or dry stripping
- Certifications
- UL / CSA / CE
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.
