Air-Care Cobra VII Power Brush System (FG0288) — TurboMax II/III
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
The Cobra VII is Air-Care's power brush agitation system, built to pair with the TurboMax negative-air machines: a self-adjusting Flex-E-Bristle brush works ducts from 4 to 18 in (14-36 in with an optional brush) at the end of a 33 ft flexible cable, loosening debris for the TurboMax to pull out. A 90V DC high-torque motor with a smart speed controller drives the brush, and a 3-button wireless remote starts, stops and reverses brush direction from wherever the operator is working the duct run.
- Flex-E-Bristle brush self-adjusts for 4-18 in ducts (14-36 in with optional brush)
- 3-button wireless remote: start, stop, reverse brush direction
- 33 ft flexible cable (3/8 in core, 5/8 in O.D. nylon); 50 ft option available
- 90V DC high-torque motor with smart speed controller
- Pairs with Air-Care TurboMax negative-air machines for agitation + extraction
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
How do I confirm this part fits my machine?
Match the manufacturer part number on this page against the parts manual published for your exact model and serial number. If the manual is not to hand, call the parts desk with the model and serial and we will confirm before you order.
Is this an OEM part?
The part number shown is the manufacturer part number for the machine listed. Contact us before ordering if you need the sourcing confirmed for a specific application.
When should a wear part be replaced?
Replace squeegee blades when the machine starts streaking or leaving water behind, brushes when the bristles are worn to the wear line, and filters on the interval in the operator manual. Running worn wear parts costs more in rework than the part does.
Can I order parts in bulk for a fleet?
Yes. Use the quote form with your machine models and quantities, and note any purchasing process your organization requires.
Product specifications
- Power
- 120/220 VAC, 50/60 Hz, 7.0 A
- Motor
- 90V DC, high torque, smart speed controller
- Cable
- 3/8 in core, 5/8 in O.D. nylon, 33 ft (50 ft optional)
- Brushes
- 4-18 in self-adjusting (14-36 in optional)
- Weight
- 28 lb motor, 7 lb cable and brush
- Dimensions
- 14.4 in W x 19.5 in D x 14 in H
- Compatible Machines
- TurboMax II, TurboMax III
Need this part in quantity, or not sure it fits?
Send the model number off your machine's data plate. We confirm the fit, the stocking level and the price before you order.
