Pacific Floorcare B-1500 High-Speed Corded Electric Burnisher — 20" Pad, 1500 RPM, 1.5 hp, 50 ft Cord (Model 545401)
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
The B-1500 is the straightforward corded burnisher for crews that maintain VCT and terrazzo on a nightly or weekly polish cycle. A 1.5 hp motor spins a 20-inch flex pad driver at 1500 rpm, which is a pad tip speed over 7850 ft/min — enough to bring a dulled finish back to gloss with the right pad and chemistry. It covers about 9090 sq ft per hour on a 50-foot 14/3 cord, so a single drop powers most of a corridor. At 79 lb with a dual-wall rotationally molded polyethylene base and a welded steel tube handle, it takes dock and stairwell abuse; the base carries a 10-year warranty. Interlock triggers and a vertical-handle safety lockout keep it from walking away from an operator.
- 20 in pad on a flex driver spinning at 1500 rpm — over 7850 ft/min pad tip speed.
- 1.5 hp motor drawing 15 amps on standard 115 V building power.
- 9090 sq ft per hour productivity rating.
- 50 ft 14/3 STO safety-yellow power cord — fewer outlet changes per run.
- Handle height adjusts instantly from the operator position.
- Dual-wall rotationally molded impact-resistant polyethylene base.
- Welded structural steel tubing handle.
- Carbon brush wear indicators so motor service is scheduled instead of discovered.
- Interlock triggers plus a vertical-handle safety lockout.
- Under 72 dBA and 79 lb with cord; ETL tested to UL/CSA standards.
- 10-year base warranty / 3-year components / 1-year labor.
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-888-287-3732 the same day.
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
Delivery method and services depend on the order and destination. Confirm the shipment plan before ordering. Full guide: how freight delivery works.
What happens if it arrives damaged?
Note the damage on the delivery receipt, take photos, and contact us promptly so we can confirm the process applicable to that shipment.
Where can I find warranty information?
Use the warranty document published for this exact model, when present, and contact us with questions before ordering.
Can my organization request purchase-order terms?
Use the commercial quote form to describe your PO or net-terms process. We will confirm whether the requested process can be supported.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Pad diameter
- 20 in
- Pad speed
- 1500 rpm
- Pad tip speed
- Over 7850 ft/min
- Pad driver
- Flex driver
- Motor
- 1.5 hp
- Voltage
- 115 V
- Amp draw
- 15 amps
- Power cord
- 50 ft 14/3 STO safety yellow
- Productivity
- 9090 ft² per hour
- Dimensions (L x W x H)
- 37 x 21 x 47 in
- Weight with cord
- 79 lb
- Sound level
- Under 72 dBA
- Base construction
- Dual-wall rotationally molded impact-resistant polyethylene
- Handle
- Welded structural steel tubing
- Safety
- Interlock triggers; vertical handle safety lockout
- Certification
- ETL tested to UL/CSA standards
- Warranty
- 10 years base / 3 years components / 1 year labor
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.
