CFR Cascade 20 Self-Propelled Recycling Carpet Extractor — 20" Path, 25 gal Solution / 25 gal Recovery, 400 psi (Model 98856)
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
The Cascade 20 is the large-area machine in the CFR line, built for schools, hotels, hospitals and offices where a portable wand unit simply cannot cover the square footage in an overnight window. It is self-propelled with a 20-inch cleaning path and a patented vacuum shoe that atomizes the solution and recovers it in the same pass, so moisture stays controlled and carpet dries in a fraction of the time a conventional extractor needs. A four-level recycling filtration process traps heavy and fine debris and returns the solution to the tank, letting one 25-gallon fill cover the kind of area that would otherwise mean repeated trips to the janitor's closet. The same machine doubles as a workstation: connect the hose and hand tools to clean stairs, upholstery, fabric-covered walls, partitions and grouted hard surfaces. A 75-foot cord keeps the operator moving across a floor plate without chasing outlets.
- 20 in cleaning path with self-propelled forward drive so the operator steers rather than pushes a loaded 25-gallon machine.
- Patented vacuum shoe atomizes solution and recovers it in the same pass, holding carpet moisture down and shortening dry time.
- Four-level recycling filtration traps heavy and fine debris and returns solution to the tank, extending water use well beyond a conventional extractor.
- 25-gallon solution and 25-gallon recovery capacity for large-area overnight work with minimal dump-and-refill trips.
- 101 CFM at 150 in of water lift for aggressive recovery on commercial-grade loop and cut-pile carpet.
- Solution pump rated to 400 psi max for restorative-grade cleaning, not just interim maintenance.
- 75 ft 12-gauge 3-wire SJTW cord covers a large floor plate from a single outlet.
- Doubles as a wand workstation with the 33 ft Insider hose plus CFR hand and floor tools for stairs, upholstery, partitions and grouted tile.
- Reduced chemical and water consumption also limits mold, fungus and allergen development in the carpet backing.
- Optional in-line ozone-assisted configuration is available for odor-sensitive sites such as schools, care homes and hotels.
- Backed by a 4-year parts / 10-year rotomolded tank / 2-year labor warranty.
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-888-287-3732 the same day.
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
Delivery method and services depend on the order and destination. Confirm the shipment plan before ordering. Full guide: how freight delivery works.
What happens if it arrives damaged?
Note the damage on the delivery receipt, take photos, and contact us promptly so we can confirm the process applicable to that shipment.
Where can I find warranty information?
Use the warranty document published for this exact model, when present, and contact us with questions before ordering.
Can my organization request purchase-order terms?
Use the commercial quote form to describe your PO or net-terms process. We will confirm whether the requested process can be supported.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Machine Type
- Self-propelled self-contained recycling carpet extractor
- Cleaning Width
- 20 in
- Solution Tank
- 25 gal (94.6 L)
- Recovery Tank
- 25 gal (94.6 L)
- Solution Pressure
- Adjustable 0-400 psi (max 400)
- Vacuum Motors
- Dual 2-stage
- Airflow
- 101 CFM
- Water Lift
- 150 in (381 cm)
- Filtration
- Four-level recycling filtration process
- Power
- 115V
- Power Cord
- 75 ft 12-gauge 3-wire SJTW
- Hose
- 33 ft Insider
- Wand Included
- No (machine only)
- Weight
- 124 lb (56 kg)
- Warranty
- 4 yr parts / 10 yr rotomolded tank / 2 yr labor
- Kitted version
- Model 98858 (adds 11 in Rapid Recovery wand / 3 in combination tool / 33 ft hose)
- Ozone-assist versions
- Model 98860 unit only / 98862 kitted
Compare models in this line
Same manufacturer, same machine type — the three closest in price.
| CFR · Carpet Extractor |
This machine
Cascade Self-Propelled Path
|
Pro Continuous Flow
CFR Pro 500 Continuous Flow Recycling Carpet Extractor — 13 gal, 100-500 psi, 11" Rapid Recovery Wand Kit (Model 98822)
|
Perfect Pro Heated Continuous
CFR Perfect Pro 500 Heated Continuous Flow Recycling Carpet Extractor — 13 gal, 100-500 psi, 1700 W In-Line Heat (Model 98830)
|
|---|---|---|---|
| Price | $8,499.00 | $4,999.00 | $4,867.00 |
| Cleaning Path | 20 in | 11 in | — |
| Solution / Recovery Tanks | 25 / 25 gal | 13 / 13 gal | 13 / 13 gal |
| Water Lift in | 150 | 150 | 150 |
| Airflow cfm | 101 | 101 | 101 |
| Pump Pressure | 400 psi | 100-500 psi | 100-500 psi |
| Links | You are viewing this one | View model CFR Pro 500 Continuous Flow Recycling Carpet Extractor — 13 gal, 100-500 psi, 11" Rapid Recovery Wand Kit (Model 98822) | View model CFR Perfect Pro 500 Heated Continuous Flow Recycling Carpet Extractor — 13 gal, 100-500 psi, 1700 W In-Line Heat (Model 98830) |
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.
