CFR Perfect Pro 500 Heated Continuous Flow Recycling Carpet Extractor — 13 gal, 100-500 psi, 1700 W In-Line Heat (Model 98830)
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
The Perfect Pro 500 is the heated version of the Pro 500 portable, aimed at facilities with heavy soil loads, grease-tracked entryways or food-service carpet where cold water alone leaves a film. A 1700 W in-line heater brings the recirculating solution up to temperature on the fly rather than relying on a pre-heated tank, so cleaning temperature holds steady through a long run instead of fading after the first few hundred square feet. Everything else carries over from the base machine: the recycling filtration loop that keeps one 13-gallon fill working, an adjustable 100 to 500 psi pump, and dual 2-stage vacuum motors at 101 CFM and 150 inches of water lift. Because the heater draws its own circuit, the unit ships with two detachable 25-foot cords and needs two 115V/20A outlets. This 98830 SKU is the machine-only configuration; the same unit kitted with wand, hand tool and hose is model 98832.
- 1700 W in-line heater raises solution temperature continuously during the run instead of draining a pre-heated tank.
- Continuous Flow Recycling filtration recirculates the solution so a single 13-gallon fill cleans far longer between dumps.
- Adjustable 100 to 500 psi solution pump with a front-mounted gauge and knob for on-the-job pressure control.
- Dual 2-stage vacuum motors deliver 101 CFM and 150 in of water lift for low-moisture recovery and fast return to service.
- 13-gallon solution and 13-gallon recovery capacity in a 128 lb portable chassis.
- Two detachable 25 ft 12-gauge SJTW cords isolate the heater load from the vacuum/pump load across two 115V/20A circuits.
- Hinged tank opens for internal access and all filters are reachable for routine cleaning without tools.
- Front-mounted drain hose for fast disposal plus a wheeled handle and 12 in rear wheels for loading.
- Powder-coated aluminum chassis with rotationally-molded polyethylene tank built for continuous wet duty.
- Cleans carpet, stairs, upholstery, fabric partitions and grouted hard surfaces with the matching CFR tool set.
- Backed by a 4-year parts / 10-year rotomolded tank / 2-year labor warranty.
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-888-287-3732 the same day.
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
Delivery method and services depend on the order and destination. Confirm the shipment plan before ordering. Full guide: how freight delivery works.
What happens if it arrives damaged?
Note the damage on the delivery receipt, take photos, and contact us promptly so we can confirm the process applicable to that shipment.
Where can I find warranty information?
Use the warranty document published for this exact model, when present, and contact us with questions before ordering.
Can my organization request purchase-order terms?
Use the commercial quote form to describe your PO or net-terms process. We will confirm whether the requested process can be supported.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Machine Type
- Portable upright recycling carpet extractor with in-line heat
- Solution Tank
- 13 gal (49 L)
- Recovery Tank
- 13 gal (49 L)
- Heater
- 1700 W in-line
- Solution Pump
- Adjustable 100-500 psi (34.5 bar max)
- Vacuum Motors
- Dual 2-stage
- Airflow
- 101 CFM
- Water Lift
- 150 in (381 cm)
- Power
- 115V / 20A
- Power Cords
- (2) 25 ft detachable 12-gauge 3-wire SJTW
- Hose
- 33 ft Insider
- Wand Included
- No (machine only)
- Weight
- 128 lb (58 kg)
- Dimensions (L x W x H)
- 38 in x 22 in x 41 in
- Body Construction
- Powder-coated aluminum chassis / rotationally-molded polyethylene tank
- Warranty
- 4 yr parts / 10 yr rotomolded tank / 2 yr labor
- Kitted version
- Model 98832 (adds 11 in Rapid Recovery wand / 3 in combination tool / 33 ft hose)
Compare models in this line
Same manufacturer, same machine type — the three closest in price.
| CFR · Carpet Extractor |
This machine
Perfect Pro Heated Continuous
|
Pro Continuous Flow
CFR Pro 500 Continuous Flow Recycling Carpet Extractor — 13 gal, 100-500 psi, 11" Rapid Recovery Wand Kit (Model 98822)
|
Cascade Self-Propelled Path
CFR Cascade 20 Self-Propelled Recycling Carpet Extractor — 20" Path, 25 gal Solution / 25 gal Recovery, 400 psi (Model 98856)
|
|---|---|---|---|
| Price | $4,867.00 | $4,999.00 | $8,499.00 |
| Solution / Recovery Tanks | 13 / 13 gal | 13 / 13 gal | 25 / 25 gal |
| Water Lift in | 150 | 150 | 150 |
| Airflow cfm | 101 | 101 | 101 |
| Pump Pressure | 100-500 psi | 100-500 psi | 400 psi |
| Run Time | unlimited | unlimited | — |
| Links | You are viewing this one | View model CFR Pro 500 Continuous Flow Recycling Carpet Extractor — 13 gal, 100-500 psi, 11" Rapid Recovery Wand Kit (Model 98822) | View model CFR Cascade 20 Self-Propelled Recycling Carpet Extractor — 20" Path, 25 gal Solution / 25 gal Recovery, 400 psi (Model 98856) |
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.
