Hawk Enterprises G2 Raptor Rectangular Orbital Floor Machine — 20" x 14" Head, 1740 RPM Orbital, 1.5 HP TEFC AC (Model F98-RAP)
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
The G2 Raptor is the chemical-free stripping answer for facilities that cannot flood a floor with stripper or shut a building down for a wet strip-out. An eccentric balanced orbital drive moves a 20 x 14 inch rectangular pad at 1740 RPM — roughly ten times the pad speed of a rotary — so finish comes off mechanically, wet or dry. The rectangular head is the practical difference from a disc machine: it reaches square into corners and runs flat along baseboards, so there is far less edge work left behind. Four primary industrial vibration isolators plus a 194 lb chassis keep operator fatigue down on long runs, and an optional active vacuum kit converts it to a dust-controlled dry stripper. At 9 amps it stays on a standard building circuit.
- Eccentric balanced orbital drive turns the pad at 1740 RPM — about ten times the pad speed of a rotary machine — for chemical-free finish removal.
- 20 in x 14 in rectangular head reaches into corners and runs flat along baseboards, cutting the hand edge-work a round machine leaves behind.
- 1.5 HP 180-frame TEFC dual-capacitor AC motor on 115-230V 60 Hz, 9.0 amp draw — runs on a standard building circuit.
- 194 lb machine weight delivers 0.657 lb per square inch of pad pressure without add-on weights.
- Four primary industrial vibration isolators plus a 2 in isolator-mounted handle carriage keep hand-arm vibration and operator fatigue down.
- Works wet or dry: dry stripping, scrubbing, sanding and stone polishing off the same head.
- Milled dust-control connector on the head; optional Active Vacuum Kit (#TH1011-RAP) adds a 6 quart tank vac, dust skirt and hoses for dust-controlled dry stripping.
- Optional 2.5 gallon handle-mounted solution tank (#A001-RAPBLK 2.5) and 20 x 14 orbital scrub brush (#A0076-2014).
- Heavy-duty steel handle with adjustable lock, dual steel operating triggers, thumb-operated safety switch, 2 in x 8 in non-marking ball-bearing wheels.
- 50 ft 12-3 two-piece industrial cord with cord lock; 66 dB average operation, meets GS42; UL/CUL listed.
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-888-287-3732 the same day.
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
Delivery method and services depend on the order and destination. Confirm the shipment plan before ordering. Full guide: how freight delivery works.
What happens if it arrives damaged?
Note the damage on the delivery receipt, take photos, and contact us promptly so we can confirm the process applicable to that shipment.
Where can I find warranty information?
Use the warranty document published for this exact model, when present, and contact us with questions before ordering.
Can my organization request purchase-order terms?
Use the commercial quote form to describe your PO or net-terms process. We will confirm whether the requested process can be supported.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Pad Size
- 20 in x 14 in rectangular
- Pad Speed
- 1740 RPM orbital
- Drive System
- Eccentric balanced orbital drive
- Motor
- 1.5 HP 180-frame TEFC dual-capacitor AC
- Power Source
- 115-230V 60 Hz
- Amp Draw
- 9.0 A
- Weight
- 194 lb (0.657 lb per sq in pad pressure)
- Vibration Isolators
- 4 primary industrial
- Power Cord
- 50 ft 12-3 two-piece industrial with cord lock
- Wheels
- 2 in x 8 in non-marking ball bearing
- Sound Level
- 66 dB average (meets GS42)
- Listing
- UL / CUL listed
- Optional
- Active Vacuum Kit #TH1011-RAP; 2.5 gal solution tank; 20 x 14 scrub brush
Compare models in this line
Same manufacturer, same machine type — the three closest in price.
| Hawk Enterprises · Floor Machine |
This machine
G2 Raptor Rectangular Orbital
|
Brute TE-20 Severe-Duty Rotary
Hawk Enterprises Brute TE-20 Severe-Duty Rotary Floor Machine — 20" Single Disc, 165 RPM, 1.5 HP TEFC AC (Model F40-01-B)
|
GP26 Dual-Motor Surfacing
Hawk Enterprises GP26 Dual-Motor Floor Surfacing Machine — 26" Path, Two Counter-Rotating 13" Drivers, 165 RPM, 6 gal Tank (Model F61-26)
|
|---|---|---|---|
| Price | $2,280.16List price |
$1,753.71List price |
$5,665.25List price |
| Cleaning Path in | 20 | 20 | 26 |
| Brush Speed rpm | 1740 | 165 | 165 |
| Run Time | unlimited | unlimited | unlimited |
| Links | You are viewing this one | View model Hawk Enterprises Brute TE-20 Severe-Duty Rotary Floor Machine — 20" Single Disc, 165 RPM, 1.5 HP TEFC AC (Model F40-01-B) | View model Hawk Enterprises GP26 Dual-Motor Floor Surfacing Machine — 26" Path, Two Counter-Rotating 13" Drivers, 165 RPM, 6 gal Tank (Model F61-26) |
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.
