Hawk Enterprises Centerfold 20" High-Speed Burnisher with Active Dust Control — 1500 RPM, 1.5 HP DC, Fold-Up Handle (Model F1500-20-01CFDC)
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
This is the burnisher for buildings that have to stay occupied while the floors get shined. The active dust-control version adds a dust ring and filter to the Centerfold chassis, which drops both the airborne pad dust and the noise — 62 dB with dust control versus 69 dB on the standard machine — so it can run in a school corridor or a medical lobby during the day. The Centerfold name is the handle: it folds flat for transport in a van and for storage in a janitor closet that will not take a fixed-handle 20 inch machine. The non-locking handle is deliberate — it lets the head float and hold constant pad pressure, which keeps amp draw steady and the shine even instead of burning swirl marks where the operator leans. A 1.5 HP DC rectified motor drives the 20 inch pad at 1500 RPM through a multi-V belt.
- Active dust control: dust ring and filter included, which is what makes daytime burnishing in an occupied building practical.
- 62 dB average with dust control versus 69 dB on the standard Centerfold — meets the GS42 quiet-cleaning standard.
- Non-locking floating handle keeps constant pad pressure, holding amp draw steady and the gloss even across the pass.
- Fold-up Centerfold handle collapses for van transport and for storage in a tight janitor closet.
- 1.5 HP DC rectified motor on 115V 60 Hz (230V optional), multi-V belt drive turning a 20 in pad at 1500 RPM.
- 10.2 amp draw in the 20 in dust-control configuration — noticeably lower than the 13.2 amps of the same-size standard machine.
- Welded heavy-gauge powder-coated industrial steel body with a 20 in brush cover and full wraparound bumper.
- Thumb-operated safety switch, negative-pressure on/off switch and dual steel operating triggers.
- Includes a flexible pad holder with a pad centering clamp; 1 in x 5 in non-marking ball-bearing wheels; 92 lb.
- 50 ft 14-3 two-piece commercial power cord with cord lock; UL/CUL listed. Also built at 1800 and 2000 RPM if a finish system needs more heat.
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-888-287-3732 the same day.
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
Delivery method and services depend on the order and destination. Confirm the shipment plan before ordering. Full guide: how freight delivery works.
What happens if it arrives damaged?
Note the damage on the delivery receipt, take photos, and contact us promptly so we can confirm the process applicable to that shipment.
Where can I find warranty information?
Use the warranty document published for this exact model, when present, and contact us with questions before ordering.
Can my organization request purchase-order terms?
Use the commercial quote form to describe your PO or net-terms process. We will confirm whether the requested process can be supported.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Pad Size
- 20 in
- Pad Speed
- 1500 RPM
- Motor
- 1.5 HP DC rectified
- Power
- 115V 60 Hz (230V available)
- Amp Draw
- 10.2 A
- Drive
- Multi-V belt
- Dust Control
- Active - dust ring and filter included
- Sound Level
- 62 dB with dust control (69 dB standard); meets GS42
- Weight
- 92 lb
- Power Cord
- 50 ft 14-3 two-piece commercial with cord lock
- Handle
- Fold-up non-locking Centerfold handle with vinyl grips
- Wheels
- 1 in x 5 in non-marking ball bearing
- Listing
- UL / CUL listed
- Other Speeds
- Also built at 1800 RPM (F1800-20-01CFDC) and 2000 RPM (F2000-20-01CFDC)
Compare models in this line
Same manufacturer, same machine type — the three closest in price.
| Hawk Enterprises · Floor Burnisher |
This machine
Centerfold Active Dust Control
|
BlackHawk Pad Two-Piece Removable
Hawk Enterprises BlackHawk 1500 High-Speed Burnisher — 20" Pad, 1500 RPM, 1.5 HP DC, Two-Piece Removable Handle (Model F57-20-02)
|
|---|---|---|
| Price | $2,095.16List price |
$1,395.44List price |
| Cleaning Path in | 20 | 20 |
| Brush Speed rpm | 1500 | 1500 |
| Run Time | unlimited | unlimited |
| Links | You are viewing this one | View model Hawk Enterprises BlackHawk 1500 High-Speed Burnisher — 20" Pad, 1500 RPM, 1.5 HP DC, Two-Piece Removable Handle (Model F57-20-02) |
More machines in the line
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.
