Mytee 1001DX-200 Speedster Deluxe Heated Carpet Extractor — 10 gal, 220 PSI, Dual 3-Stage Vac, 200 CFM / 130" Water Lift, 2000W Heater
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
The Mytee 1001DX-200 Speedster Deluxe is Mytee's flagship portable heated box extractor — a California-built 10-gallon machine pairing a 220 PSI diaphragm pump, DUAL 3-stage vacuum motors (200 CFM / 130" water lift) and a 2000-watt REAL HEAT in-line heater (~210°F). Its dual twist-lock 50' cords and 10" foam-filled wheels make it the go-to for carpet-cleaning pros who want maximum pressure, suction and heat in a portable body without stepping up to a truckmount.
- Flagship portable heat: 2000-watt REAL HEAT in-line heater sustains hot-water extraction (~210°F)
- 220 PSI diaphragm pump — top-tier portable pressure for deep soil release
- DUAL 3-stage vacuum motors, 200 CFM / 130" water lift for maximum suction and fast dry times
- Big 10-gal solution / 10-gal recovery tanks — long runtime between fills on large jobs
- 10" foam-filled wheels + 4" locking casters — moves easily around job sites and up stairs
- Dual detachable 50' twist-lock cords for reach across two circuits
- California-built, factory-tested; roto-molded body resists rust and denting
- Backed by Mytee's 2 yr major-component / 10 yr housing warranty — the portable alternative to a truckmount
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-888-287-3732 the same day.
Field demonstration
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Replacement parts & consumables
Wear parts and consumables matched to this machine. Stock them with the unit; reorder by part number.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
Delivery method and services depend on the order and destination. Confirm the shipment plan before ordering. Full guide: how freight delivery works.
What happens if it arrives damaged?
Note the damage on the delivery receipt, take photos, and contact us promptly so we can confirm the process applicable to that shipment.
Where can I find warranty information?
Use the warranty document published for this exact model, when present, and contact us with questions before ordering.
Can my organization request purchase-order terms?
Use the commercial quote form to describe your PO or net-terms process. We will confirm whether the requested process can be supported.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Model / Part Number
- 1001DX-200 (115V 60Hz); 230V 50Hz version available by inquiry
- Machine Type
- Premium portable heated box-and-wand carpet extractor (dual-vac)
- Body
- Roto-molded polyethylene housing; 10 in (25.4 cm) foam-filled rear wheels; 4 in (10 cm) locking front casters
- Solution Tank
- 10 gal (37.9 L)
- Recovery / Vacuum Tank
- 10 gal (37.9 L)
- Vacuum Motors
- Dual 3-stage; 5.6 in diameter; 200 CFM combined; 130 in water lift
- Pump
- Diaphragm demand pump; 220 PSI; 1.35 GPM
- Heater
- 2000 watt in-line REAL HEAT system; ~210°F maximum
- Power Cord
- Dual 50 ft (15.2 m) twist-lock 12/3 (two separate circuits)
- Amp Draw (115V 60Hz)
- Cord One: 20 amps; Cord Two: 18 amps
- Amp Draw (230V 50Hz)
- Cord One: 10 amps; Cord Two: 9 amps
- Net Weight
- 110 lb (51.7 kg)
- Machine Dimensions
- 28 in × 18.5 in × 39 in (71 × 47 × 99 cm)
- Shipping Weight
- 125 lb (56.7 kg) (excl. pallet)
- Shipping Dimensions
- 30 in × 20 in × 47 in (76 × 51 × 119 cm)
- Included
- Detachable dual 50' 12/3 power cords. Wand/hoses sold separately (bare Deluxe unit; 2005CS package adds wand + hose)
- Build
- Made in Mytee's California plant; factory-tested to quality standards
- Warranty
- 1 yr parts & labor; 2 yr major components (pump/vac motor/heater); 10 yr rotomolded housing & tanks (Mytee Limited Warranty, REV 5.27.2026)
- Applications
- Professional carpet cleaning (residential/commercial), high-pressure hot-water extraction, upholstery, portable alternative to a truckmount
Documents
Compare models in this line
Same manufacturer, same machine type — the three closest in price.
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.
