
Mytee 2002CS Contractor's Special Heated Carpet Extractor — 10 gal, 120 PSI, 1200W Heater, 100 CFM / 130" Water Lift, incl. 12" Dual-Jet Wand
- FREIGHTFree freight to any US address, included at checkout. How it works →
- US EQUIPMENT SALESSold to US customers by Janitori, based in Canada
- DOCUMENTED DETAILSUse the specifications and documents published for this model
- FREE FREIGHTAny US address, no order minimum — included at checkout
- EQUIPMENT SUPPORTCall 1-888-287-3732, 24/7
Product description
The Mytee 2002CS Contractor's Special is a start-a-business heated carpet-cleaning package: a 10-gallon single-cord box extractor with a 120 PSI diaphragm pump, single 3-stage 130" water-lift vacuum and a 1200-watt REAL HEAT in-line heater (~210°F), bundled with a 15' vacuum/solution hose combo and a 12" dual-jet stainless wand. It runs on ONE 20A cord — a real advantage for finding power on the job — and is aimed at the working carpet-cleaning contractor.
- Complete start-a-business package: heated 10-gal extractor + 12" dual-jet wand + 15' hose combo
- Runs on ONE 20A power cord — far easier to find adequate power on the job than dual-cord machines
- 1200-watt in-line REAL HEAT heater to ~210°F breaks up grease and ground-in soil
- 120 PSI diaphragm pump + 3-stage 130" water-lift vacuum for strong rinse and fast recovery
- Big 10-gal solution / 10-gal recovery tanks for fewer fill-and-dump trips per job
- Contractor-ergonomic: waist-high switches, easy-open lid, bucket-high drain, non-marking wheels
- Durable roto-molded polyethylene body resists rust and denting
- Backed by Mytee's 2 yr major-component / 10 yr housing warranty
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-888-287-3732 the same day.
Field demonstration
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Replacement parts & consumables
Wear parts and consumables matched to this machine. Stock them with the unit; reorder by part number.
Why buy from Janitori
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
Delivery method and services depend on the order and destination. Confirm the shipment plan before ordering. Full guide: how freight delivery works.
What happens if it arrives damaged?
Note the damage on the delivery receipt, take photos, and contact us promptly so we can confirm the process applicable to that shipment.
Where can I find warranty information?
Use the warranty document published for this exact model, when present, and contact us with questions before ordering.
Can my organization request purchase-order terms?
Use the commercial quote form to describe your PO or net-terms process. We will confirm whether the requested process can be supported.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Model / Part Number
- 2002CS (115V 60Hz); 230V 50Hz version available by inquiry
- Machine Type
- Portable heated box-and-wand carpet extractor — contractor package
- Body
- Roto-molded polyethylene housing; non-marking wheels + locking caster
- Solution Tank
- 10 gal (37.9 L)
- Recovery / Vacuum Tank
- 10 gal (37.9 L)
- Vacuum Motor
- Single 3-stage; 5.6 in diameter; 100 CFM; 130 in water lift
- Pump
- Diaphragm demand pump; 120 PSI; 1.3 GPM
- Heater
- 1200 watt in-line REAL HEAT system; ~210°F maximum
- Power Cord
- Single 25 ft (7.6 m), 12/3 — runs on ONE cord
- Amp Draw (110-120V 60Hz)
- Cord One: 20 amps
- Amp Draw (220-240V 50Hz)
- Cord One: 10 amps
- Net Weight
- 87 lb (39.5 kg)
- Machine Dimensions
- 28 in × 18.5 in × 39 in (71 × 47 × 99 cm)
- Shipping Weight
- 115 lb (52.2 kg) (excl. pallet)
- Shipping Dimensions
- 29.5 in × 19.25 in × 46.5 in (75 × 48.9 × 118 cm)
- Included Wand
- 8300-EZ 12 in dual-jet stainless steel carpet wand w/ disconnect
- Included Hose
- 8500 hose set — 15 ft crush-proof vacuum hose + high-pressure solution hose
- User-friendly features
- Waist-high switches, easy-open lid, bucket-high drain, non-marking wheels
- Warranty
- 1 yr parts & labor; 2 yr major components (pump/vac motor/heater); 10 yr rotomolded housing & tanks (Mytee Limited Warranty, REV 5.27.2026)
- Applications
- Professional carpet cleaning, upholstery, commercial/residential accounts, restoration light-duty
Documents
Compare models in this line
Same manufacturer, same machine type — the three closest in price.
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.















