FOAMit Central Foam Station FI-STN
- FREIGHTFlat-rate freight to the lower 48: $179 for this item on its own. Your rate shows at checkout before you pay. How it works →
- Damaged in transit
- We file the claim
- FOAMit warranty
- We open the claim PDF
- Lower price from a US seller
- We match it
- SHIPS WITHIN THE USUS warehouse to your door. No customs, no duties.
- DISTRIBUTOR SINCE 1994The equipment arm of ERE Inc.
- FLAT-RATE FREIGHT$179 on its own, lower 48 — shown at checkout
- EQUIPMENT SUPPORTCall 1-866-989-7489, 24/7
Product description
Wall mounted foam drop station that draws pre-mixed solution from a central system. Discharge: 50 ft. (15.2 m) hose, with 3/4 in. (19 mm) inside diameter.
- Power type: central system
- Chemical pickup type: supplied with pre-mixed solution from a central system
- Number of products unit can draw from: supplied with one product
- Discharge line length/diameter: 50 ft. (15.2 m) hose, with 3/4 in. (19 mm) inside diameter
- Discharge wand/tip type: 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
Receiving — do not sign clean
- Count the pieces against the bill of lading before the driver leaves. A machine, its batteries and its accessories can ship as separate items.
- Walk the pallet. Check the shrink-wrap, the crate corners and the machine itself — forks go through crates more often than anyone admits.
- Photograph any damage before you sign. Once the driver has your signature the photographs are worth much less.
- Write the damage on the delivery receipt. A clean signature on a damaged pallet is what makes a freight claim hard. Then call 1-866-989-7489 the same day.
Complete your setup
This machine runs on Janitori commercial-grade chemistry — machine and solution from one supplier, one reorder. Stock the essentials with your unit.
Replacement parts & consumables
Wear parts and consumables matched to this machine. Stock them with the unit; reorder by part number.
Why buy from Janitori
Janitori is located in Canada and sells commercial equipment to customers in the USA. More on how we operate →
Commercial & fleet orders
Gyms, schools, facilities, property managers, government. Tell us your purchasing process, quantity and timeline. Ask about PO or net-terms eligibility; approval is not guaranteed.
Questions, answered
What training is required to run this machine?
Follow the manufacturer operator manual and your workplace's required training and safety procedures before use.
How does freight delivery actually work?
You get tracking and carrier details by email when it leaves the warehouse. A machine that travels on a pallet is delivered by appointment: the carrier phones to book a window. Freight for this machine is a flat rate to the lower 48, shown at checkout before you pay. Full guide: how freight delivery works.
What happens if it arrives damaged?
Write the damage on the delivery receipt and photograph it before the driver leaves, then call us the same day. We file the claim with the carrier, not you.
What warranty does it carry?
The warranty the manufacturer publishes for this model. For a claim, contact us first. We open it with the manufacturer, coordinate parts or service, and stay on it until it is resolved.
Can I return it?
Call us within 30 days of delivery if the machine is not right for your facility and we arrange the return with the manufacturer. It must be unused or in like-new condition with its original packaging. Return freight is paid by the customer, and some manufacturers apply a restocking fee, which we pass through at cost. Full terms.
Will you match a lower price?
Yes, on machines. Send us the listing before you order and we match the same model advertised for less by another US seller. Price match terms.
Can my organization pay by purchase order?
Yes. Purchase orders are accepted, and net terms are reviewed case by case for approved commercial accounts. Use the commercial quote form to tell us your billing process.
Which pads and cleaning products should I use?
Use only verified product references and the manufacturer's compatibility requirements. Contact the equipment desk with your floor type and application before substituting a product.
Product specifications
- Model
- FI-STN
- Power type
- central system
- Chemical pickup type
- supplied with pre-mixed solution from a central system
- Number of products unit can draw from
- supplied with one product
- Discharge line length/diameter
- 50 ft. (15.2 m) hose, with 3/4 in. (19 mm) inside diameter
- Discharge wand/tip type
- 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
- Output distance
- 25-30 ft. (7.6-9.1 m)
- Output volume
- 20-45 gal/min (75.7-170.3 l/min)
- Flow rate
- 2 gal/min (7.6 l/min)
- Product height
- 18 inches (45.7 cm)
- Tubing/fitting sizes
- 4 ft. (1.2 m) chemical inlet hose with 1/2 in. (12.7 mm) inside diameter and 1 lb check valve
- Compressed air requirements
- 40-80 psi (2.8-5.5 bar) with 5-10 cfm (141.6-283.2 l/min)
- Liquid temperature range
- 40-100°F (4.4-37.8°C)
- Central system requirements
- pre-mixed solution must be supplied by a properly sized header system at 2 gpm and 40-80 psi (2.8-5.5 bar)
Compare models in this line
Same manufacturer, same machine type — the three closest in price.
| FOAMit · Foam Unit |
This machine
Central Station FI-STN
|
Central Doorway Station DS-STN
FOAMit 24V Central Doorway Foam Station DS-STN
|
Twin-Line Pre-Mix FI-WL-LVTL
FOAMit Twin-Line Pre-Mix Foam Unit FI-WL-LVTL
|
Twin Line Central Doorway
FOAMit 24V Twin Line Central Doorway Foam Station DS-STN-TL
|
|---|---|---|---|---|
| Price | $1,133.49 | $1,107.67 | $1,245.66 | $1,396.46 |
| Air Supply Pressure | 40-80 psi | 40-80 psi | 40-80 psi | 40-80 psi |
| Flow gal/min | 2 | 2 | 1 | 2 |
| Hose Length | 50 ft | — | 25 ft | — |
| Air Requirement | 5-10 cfm | 5-10 cfm | 3-5 cfm | 5-10 cfm |
| Links | You are viewing this one | View model FOAMit 24V Central Doorway Foam Station DS-STN | View model FOAMit Twin-Line Pre-Mix Foam Unit FI-WL-LVTL | View model FOAMit 24V Twin Line Central Doorway Foam Station DS-STN-TL |
More machines in the line
FOAMit Battery Powered Foam Rinse Sanitize Unit FRS-...
$7,476.77
FOAMit 50 Gallon High Volume Foam Unit FI-50NT-HV
$6,115.19
FOAMit 30 Gallon Gel Unit with Agitator GI-30N-AM
$4,879.80
FOAMit 30 Gallon Lithium-ion Battery Powered Foam Un...
$4,165.00
FOAMit The Rover - Battery Powered Foam Unit FI-BP-RVR
$4,138.61
FOAMit 25 Gallon Lithium-ion Battery Powered Foam Un...
$4,077.04
FOAMit 50 Gallon Smart Foam Unit FI-50N-SM
$4,062.59
FOAMit 20 Gallon Lithium-ion Battery Powered Foam Un...
$3,769.18
FOAMit 10 Gallon Battery Foam Unit with Polypropylen...
$3,740.22
FOAMit 10 Gallon Battery Foam Unit with Stainless St...
$3,740.22
FOAMit 10 Gallon Lithium-ion Battery Powered Foam Un...
$3,659.22
FOAMit 30 Gallon Smart Foam Unit FI-30N-SM
$3,474.78
FOAMit 25 Gallon Smart Foam Unit FI-25N-SM
$3,394.41
FOAMit Concentrate Foam and Sanitize Unit FISP-WC
$3,383.11
FOAMit 5 Gallon Lithium-ion Battery Powered Foam Uni...
$3,216.11
FOAMit 24V Twin-Line Concentrate Doorway Foam Unit f...
$3,084.26
FOAMit 20 Gallon Smart Foam Unit FI-20N-SM
$3,018.53
FOAMit 50 Gallon Foam Unit FI-50N
$2,952.75
FOAMit 10 Gallon Smart Foam Unit FI-10N-SM
$2,943.55
FOAMit 24V Twin-Line Concentrate Doorway Foam Unit D...
$2,860.59
FOAMit 15 Gallon Concentrate Foam Unit for 2-Part Pr...
$2,737.19
FOAMit 24V Single-Line Concentrate Doorway Foam Unit...
$2,645.14
FOAMit 5 Gallon Smart Foam Unit FI-5N-SM
$2,547.16
FOAMit 15 Gallon Concentrate Foam Unit FI-CN-15N
$2,426.81
Outfitting a facility or a fleet?
Multi-unit pricing, chemistry programs, and parts stocking plans. One supplier for the machine and everything it consumes.
